item
Profile 8 80x80

Profile 8 80x80


Show all 16 variants
On request

Technical Data

Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.

Properties

Article number 0.0.488.84
Line line 8
Property natural
ESD ESD-safe = Yes
Cross-sectional area A = 19.43 cm2
Moment of Inertia, torsional It = 101.09 cm4
Moment of Inertia, x-axis Ix = 134.24 cm4
Moment of Inertia, y-axis Iy = 134.24 cm4
Weight, spec. Length m = 5.25 kg/m
Delivery unit 1 pce., length 6000 mm
Material Al, anodized
Permissible groove extraction force F = 2500 N
Resistance Moment, x-axis Wx = 33.56 cm3
Resistance Moment, y-axis Wy = 33.56 cm3

Description

Profile 8 80x80 8NO light is a universal construction profile made of high-quality anodized aluminium in the modular dimension of Line 8.
This weight-reduced aluminium profile in the light design variant from item features eight closed Line 8 profile grooves that are especially easy to open up. This aluminium profile can be used to build frames that have easy-to-clean unbroken outer surfaces.
The profiles in Line 8 are available in standard, light and economy (E) design variants. Due to additional cavities, a Profile 8 80x80 light weighs around 26 percent less than a Profile 8 80x80 in the same length. A Profile 8 80x80 E weighs approximately 44 percent less. Please note the additional screw channel in the central cavity of Profile 8 80x80 E.
The area moments of inertia against profile deflection and the maximum groove load-bearing capacity of the selected profile must be given due consideration in respect of the loads involved.
Line 8 profiles from item are available with closed grooves in a variety of arrangements. The profile wall can be opened up partially or completely so that the groove underneath can be used. The NO design variant indicates that the closed grooves are particularly easy to open up thanks to two notches on the underside of the outer surface.
Automatic-Fastening Set 8 NO (0.0.489.96) is ideal for connecting profiles together. It requires only a minimal opening in the groove and comes with its own cap.

Assembly Instructions

Exposing the groove: It is advisable to mark the start and end of the opening with a hole of diameter 9.2 mm.
The groove covering can them be removed easily by levering with a screwdriver.
It is advisable to deburr the edges of the groove opening.
T-Slot Nuts, for example, can then be inserted into the profile groove through the opening.

Variants

Sort by

Unità di consegna:  Taglio Lunghezza:  20 ... 6000 Tipo:  leggero Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  3000 Tipo:  leggero Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  leggero Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Taglio Lunghezza:  50 ... 6000 Tipo:  leggero Scanalature:  aperte aperte Colore:  Alluminio, non anodizzato Alluminio, non anodizzato
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  leggero Scanalature:  aperte aperte Colore:  Alluminio, non anodizzato Alluminio, non anodizzato
Unità di consegna:  Taglio Lunghezza:  20 ... 6000 Tipo:  economy Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  economy Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Taglio Lunghezza:  20 ... 6000 Tipo:  standard Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  3000 Tipo:  standard Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  standard Scanalature:  aperte aperte Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Taglio Lunghezza:  20 ... 6000 Tipo:  leggero Scanalature:  chiuse su 1 lato chiuse su 1 lato Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  leggero Scanalature:  chiuse su 1 lato chiuse su 1 lato Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Taglio Lunghezza:  20 ... 6000 Tipo:  leggero Scanalature:  chiuse su 2 lati (90°) chiuse su 2 lati (90°) Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  leggero Scanalature:  chiuse su 2 lati (90°) chiuse su 2 lati (90°) Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Taglio Lunghezza:  20 ... 6000 Tipo:  leggero Scanalature:  tutte chiuse tutte chiuse Colore:  Alluminio naturale Alluminio naturale
Unità di consegna:  Pezzo Lunghezza:  6000 Tipo:  leggero Scanalature:  tutte chiuse tutte chiuse Colore:  Alluminio naturale Alluminio naturale

Load Calculation

Deflection calculator

Force application
20 6,000

Downloads

Accessoires

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
35020190
UNSPSC 9.0
30102306
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
eCl@ss 6.0.1
23360101
eCl@ss 11.0
23360101
eCl@ss 4.0
35020106
eCl@ss 7.1
35020190
UNSPSC 7.0
30102306
Customs tariff number
76042100